Skip to main content
ClusterInfo

Preparing your DMT vape pen

How a DMT vape pen works, the equipment patients use, the liquid strength they report, and how to fill and store a pen safely.

Last updated: May 15, 2026

Patients who use DMT to abort cluster headache attacks typically inhale it from a vape pen loaded with DMT liquid (pure DMT powder dissolved in a carrier liquid). This page covers the equipment, the strength of liquid patients report using, and how to fill, store, and troubleshoot a pen safely.

DMT is a controlled substance in most countries. This page assumes you have lawful access, for example through a clinical trial or in a country where a doctor can prescribe it, and it does not cover how to obtain DMT. If you are in a trial or a prescribed program, use the product and instructions your care team gives you.

Time needed: A few minutes to fill a cartridge, plus 15 minutes of waiting time for the coil to soak.

How far does a cartridge go? Aborting an attack typically requires 5–15 mg of DMT. At the liquid strength described below, one 1 ml cartridge is enough for roughly 15 to 50 attacks.

If you've never used a vape before, don't worry. It's simpler than it looks: a small battery heats a cartridge of liquid, and you inhale the vapor.


Your options

There are three common setups:

  • Option A: A pre-filled cartridge or disposable pen. A disposable pen is a complete device. A pre-filled cartridge screws onto a battery, typically a 510-thread battery (explained below).

    • The DMT concentration of a pre-filled cartridge may be higher than you need for aborting a cluster headache. Check its strength with whoever supplied it, and start with a very small puff (the aborting section explains how).
  • Option B: Battery + empty cartridge. A small pen-style battery and a separate empty cartridge, which you fill with DMT liquid (explained below).

  • Option C: Complete kit. An all-in-one device like the Coolfire Z60, which comes with a battery, a built-in tank, and a coil: everything except the liquid. You fill the tank yourself. These are bulkier but often have more battery life and an easy-to-read screen.

Your device needs to have variable voltage. This allows you to adjust the temperature to optimally vaporize DMT (see Aborting Protocol).

The rest of this page covers the equipment for Options B and C and how to fill your device. If you have a pre-filled cartridge (Option A), you only need a fitting battery. Check the vape pen battery section below.


Equipment

The equipment is standard vaping hardware, sold in vape shops and online.

All equipment needed to prepare a DMT vape pen for cluster headaches: items laid out and labeled. The equipment, laid out. Details on each item below.

The instructions below cover Option B in detail. If you're using a complete kit (Option C), the filling steps are the same: you fill your kit's tank instead of a cartridge.

1. Vape pen battery (~$25-50)

Skip this if you're using a complete kit (Option C). It comes with a battery.

What it is: The bottom half of your vape pen: a small rechargeable battery with a button and a charging port.

What to look for: You need a battery with variable voltage. This means you can turn the temperature up or down with a button or dial. This matters because too low and the liquid doesn't vaporize properly, too high and the DMT gets destroyed by heat. You'll want to start at around 2.5 volts and adjust upward if needed. Most people find the right setting between 2.5-3.5 volts. The right setting produces smooth, visible vapor without any burnt taste.

Some recommended models:

Make sure the battery is fully charged before you need it. A dead battery during a cluster attack is the last thing you want. Charge it as soon as it arrives.

2. Ceramic coil cartridge (~$5-15)

Skip this if you're using a complete kit (Option C). It comes with a tank and coil.

What it is: The top half of your vape pen: a small transparent tank that holds the liquid, with a built-in heating element (called a "coil") at the bottom. Cartridges are frequently sold together with the battery.

What to look for: Get one with a ceramic coil. Ceramic heats more evenly than metal, which means the DMT turns into vapor smoothly instead of burning. Look for cartridges labeled "ceramic." CCell is a popular brand that uses ceramic, but any ceramic cartridge will work. Make sure it fits your battery: most vape parts use a standard screw-on fitting called "510 thread." When in doubt, ask the shop for a "510 thread ceramic cartridge."

DMT vape pen anatomy for cluster headaches: exploded diagram showing mouthpiece, cartridge, 510-thread connection, ceramic coil, button, and battery. The parts of a vape pen. The cartridge screws onto the battery via a standard 510 thread connection.

3. Syringe (~$1-3)

What it is: A small syringe (without a needle) for transferring the finished liquid into your cartridge.

What to look for: A 1 ml or 3 ml syringe with a blunt tip (no sharp needle). These are sold at pharmacies (ask for an "oral dosing syringe") and online. A blunt-tip syringe makes it easy to fill the narrow cartridge opening without spilling.

The DMT liquid

Patients in the cluster headache community most often report a liquid with about 333 mg of pure DMT powder per milliliter of carrier liquid, usually called a 1:3 ratio. At that strength, 1 to 2 puffs usually deliver an aborting dose, and the DMT stays dissolved without clogging the cartridge.

A few facts about the liquid matter for safety and for getting a reliable dose:

  • Know the concentration. The same puff from a 1:1 liquid contains about three times as much DMT as a puff from a 1:3 liquid. Patients report using anywhere from 1:1 (stronger per puff, more likely to recrystallize) to 1:5 (more puffs needed, very stable). If you don't know the strength of your liquid, start with one very short puff.
  • Freebase vaporizes; salts don't. The DMT powder has to be in its freebase form to vaporize. Salt forms don't vaporize efficiently.
  • Propylene glycol (PG) is the base. DMT powder dissolves well in pure PG, the clear, odorless liquid used in vape juice. It dissolves poorly in vegetable glycerin (VG), so liquids with VG are more likely to recrystallize and need a higher voltage to vaporize. Any base must be nicotine-free.
  • Label it. A loaded pen looks identical to an ordinary nicotine vape. Mark it clearly (for example, a piece of tape marked "DMT") so nobody uses it by mistake, and keep it out of reach of children.

Filling the cartridge

Use your syringe to transfer the liquid into your cartridge.

  1. Screw the cartridge onto the battery if you haven't already. This gives you something to hold onto.
  2. Unscrew the mouthpiece from the top of the cartridge. It twists off to reveal the tank opening. You'll see a small hole in the very center: that's the airway (where air flows through when you inhale). Don't put liquid into that center hole.
  3. Draw up the liquid with your syringe. Slowly squeeze it into the tank, aiming for the sides of the tank (not the center hole). Fill until the liquid is about 1 mm below the top rim. Don't overfill, or it will gurgle and spit when you use it.
  4. Screw the mouthpiece back on.
  5. Stand the pen upright and wait 15 minutes before using. This gives the ceramic coil time to soak up (or "wick") the liquid. If you fire the coil while it's still dry, you'll permanently burn it and need a new cartridge.

Storage and troubleshooting

Storing DMT liquid

Store any liquid that isn't in a cartridge in a sealed glass bottle. A freezer is ideal for long-term storage. If you store the liquid in the freezer, the DMT might crystallize. This is normal and easy to fix. See "If the liquid turns cloudy" below.

Storing your loaded pen

  • Store your loaded pen upright, so the coil stays soaked with liquid
  • A bedside drawer or medicine cabinet is fine
  • Keep it out of reach of children, and label it clearly so nobody mistakes it for an ordinary vape

If the liquid turns cloudy or crystallizes

This can happen if the pen or bottle gets cold, and it's completely normal. The DMT has just turned back into tiny solid crystals. Don't throw it away.

To fix it:

  1. Put the cartridge (or bottle) into a small waterproof zip-lock bag (to protect it from water)
  2. Submerge the bag in a cup of hot water for about 5 minutes
  3. Take it out and give it a shake
  4. The liquid should turn clear again. It's ready to use

If the cartridge gets clogged

Sometimes DMT re-crystallizes right at the mouthpiece opening, blocking airflow. If you try to inhale and feel resistance:

  1. Try gently warming the pen. For example, tug it under your armpit for a couple minutes
  2. If that doesn't work, try the hot water bag method above
  3. You can also try taking a few short, firm puffs without pressing the button. The suction can loosen it

Quick reference card

Save a screenshot of this section for quick access.

Equipment

ItemWhat to ask forApprox. cost
Vape pen battery"Variable voltage, 510 thread battery" (or complete kit)$25-50
Cartridge"510 thread ceramic coil cartridge" (skip if using kit)$5-15
Syringe1-3 ml, blunt tip preferred$1-3

The liquid

  • Most often reported: about 333 mg of pure DMT powder per ml of carrier liquid (a 1:3 ratio), 1 to 2 puffs per attack
  • Unknown strength → start with one very short puff
  • Fill the cartridge from the sides, not the center hole, then wait 15 min before first use

Storage

  • Liquid (to load pen later): in sealed glass bottle in the freezer
  • Loaded pen: upright, room temperature
  • If liquid crystallizes → warm up under armpit, or zip-lock bag + hot water for 5 min

Did this guide teach you something about cluster headaches that you'll act on?

Disclaimer

The information on this website is provided for educational and harm reduction purposes only. It does not constitute medical advice and should not replace consultation with a qualified healthcare professional. See our Legal page for more details.